Intellectual Property

Trademark Vienna Classification: How Figurative Marks Get Categorised in India

21 November 2026 · 8 min read
This article is published for general information only. It is not legal advice and should not be relied upon as such. Statutes and case law referenced were current as of the publication date and may have been amended since. For advice on a specific matter, please contact a qualified advocate.

The Vienna Classification is an international system that sorts the image elements of a logo, such as animals, shapes, letters and symbols, into numbered codes. The Indian Trade Marks Registry applies it to device marks before examination, which makes it central to any public search tm check for a logo. This guide is written for brand owners and designers in Jaipur and elsewhere in India who are preparing a figurative filing.

Quick route: finding a Vienna code and searching with it

Open the Vienna Classification page on the WIPO site, browse the categories to the element you need, and note the number. A Vienna code is written as category, division and section, separated by dots, with the exact numbers read from the WIPO tables.

Then open the Trade Mark Public Search and choose the device mark category. The Vienna code field appears there beside the class field, as the Registry's public search guidelines describe. The full steps and a worked example are further down.

What is the Vienna Classification and why does the Indian Registry use it?

The Vienna Classification is an international classification of the figurative elements of marks, set up by the Vienna Agreement of 1973. Trade mark offices use it to describe and retrieve logos by what they depict, so that examiners and searchers can find visually similar marks without reading a verbal description.

WIPO, which publishes the system, notes that the Vienna Classification is regularly revised. A tenth-edition text dated 1 January 2026 is available on the WIPO site. Each country that is party to the Agreement decides how far it applies the system; the preface to the Classification says its scope is the one each party attributes to it.

Printed logo drawings sorted into labelled folders on a desk beside a binder of classification codes

Where it fits in the Indian examination process

The Registry's published procedure for processing applications describes a pre-examination stage. Under that standard operating procedure for processing trade mark applications, an application whose mark has figurative elements is codified under the Vienna system and then moves to examination. A mark filed purely as a word proceeds directly to examination.

In practice, this means a logo application has one extra internal step. The codes that officials assign become part of how the mark is retrieved later, both by examiners comparing it with earlier marks and by members of the public searching the register.

How are the figurative elements of a logo coded?

Each distinct image element in a logo is matched to a code in a three-level hierarchy of categories, divisions and sections. A logo with several elements normally receives several codes, one for each element, and the codes are stored against the application so the mark can be searched by image content.

Take a logo showing a bird inside a circle. Birds belong to the animals category, while circles belong to the geometrical figures category. The mark needs a code for each, and a further code may apply if the bird holds an object or sits on a branch. Lettering that is stylised enough to count as a figurative feature can also be coded.

What the coding depends on

The Registry does the coding, not the applicant, but the inputs come from the filing. The coders work from the representation of the mark you upload and the description you give. A drawing that is unclear, cropped or low in resolution makes it harder to see what the elements are, and a description that disagrees with the image creates doubt about what should be coded.

Colour is a second variable. As the Registry SOP covers figurative processing, check it for colour handling. A mark filed in colour is treated differently from one filed in black and white, and a claim of colour should match the artwork exactly. If the drawing is in black and white, the mark is considered in all colours.

Vienna codes and Nice classes: two separate systems

Brand owners often assume the Vienna code and the Nice class are the same thing. They are not. The Nice class records the goods or services the mark will cover. The Vienna code records what the image looks like. A device mark uses both, and a search often needs both.

FeatureVienna ClassificationNice Classification
What it classifiesFigurative elements of the mark (image content)Goods and services the mark is used for
Who assigns itRegistry officials, after data entryChosen by the applicant at filing
Applies toDevice and figurative marksEvery application, including word marks
Main use in a searchFinding logos that look alikeNarrowing results to relevant goods or services

A wrong choice on one axis does not fix itself through the other. A well-coded logo filed in the wrong class still attracts examination questions on the goods. For the class side of the problem, see this note on trademark class mistakes that delay registration in India.

Which drawing and description errors slow a device mark?

The errors that most often slow a device mark are an unclear or inconsistent representation, a description that omits or contradicts visible elements, filing several logo versions in one application, and a wrong or over-broad class. Each can draw an examination query, which adds correspondence before the mark is accepted.

Logo artwork file with a blurred and a sharp version printed side by side on a designer's table

Representation problems

  • Low resolution or cropped artwork. Fine details, thin lines and small lettering should remain legible at the size of the filing.
  • Mockups instead of the mark. A logo placed on a bag, shopfront or label can introduce extra elements the applicant did not intend to claim.
  • Different versions. One application covers one mark. A horizontal and a stacked version of a logo are different representations.
  • Word and device mismatch. If the words in the logo differ in spelling or order from the words stated in the application, the Registry may ask which is intended.

Description problems

  • Elements left out. If the logo has a crescent, a leaf and a monogram, the description should mention all three.
  • Elements that are not there. A description of a design that is not visible in the drawing can confuse coding.
  • Vague goods descriptions. Phrases such as "all goods" or "general items" invite queries and a narrower specification.
  • Class chosen from the business name. The class follows the goods or services, not the name of the company.

Whether any of these will cause a delay in a specific case depends on the application and the examiner. No timeline can be promised, and no error is guaranteed to draw a query. The practical point is that clean artwork and an accurate description reduce avoidable questions.

How to run a public search tm check for a logo

To run a public search for a logo, open the Trade Mark Public Search on IP India's portal, choose the device mark option, enter the Vienna code or codes that fit your logo, and enter the class. Then review the results for similar marks, their status and their goods. Repeat with several codes and classes.

Monitor in a Jaipur office showing a blurred search form with printed notes of figurative element lists beside it

The official Trade Mark Public Search page asks for an email address or mobile number, a captcha and an OTP before use. Once in, the available criteria change with the search category you pick.

Worked example (hypothetical): a bird inside a circle

Suppose a bakery plans a logo of a bird inside a circle. This is a hypothetical search, not a real mark. Look up the bird under the animals category and its birds division, and the circle under the geometrical figures category.

In the device mark category, enter the bird code with the class for bakery goods and read the results. Then repeat with the circle code, and with neighbouring codes in the same divisions. A similar logo may have been coded one step away, so the neighbouring searches can surface marks the first search missed.

The steps in order

  1. List the elements. Write down every visible element of the logo: each animal, shape, plant, object and any stylised letter.
  2. Match each element to a Vienna code. Use the WIPO classification to find the code. Note every code that could plausibly fit, including neighbouring ones, since a similar logo may have been coded one step away.
  3. Choose the search category. The Registry's guidelines for the public search state that for a device mark the criteria are the Vienna code and the class, and that the class criterion is common to all categories and compulsory.
  4. Search each relevant class. Start with the class for your goods or services, then try related classes. The classes can be looked up through the portal's class details link.
  5. Run a word search too. If the logo includes words, search the words separately, including spelling and sound variants.
  6. Read the results. Note each similar mark's status, class, proprietor and goods. The meaning of each status is covered in this explanation of trademark status on the IP India portal.

A search of this kind has limits. Newly filed marks may not yet be coded, so a gap in image search results does not show that no similar logo exists. A mark can also be confusingly similar in sound or idea without sharing any Vienna code.

Preparing a logo filing: a checklist for brand owners and designers

Applicants in Jaipur and across India file through the same online Registry process, so the same preparation applies wherever the business is located. Before filing, work through these points with the designer.

  • Finalise one version of the logo and export it as a clear, high-resolution image with a plain background.
  • Decide whether to file the device, the words alone, or both as separate applications. The trade-offs between these routes are explained in logo registration in India: trademark, copyright or both.
  • List every element in the artwork and draft a description that covers them all.
  • Run the Vienna-code search and the word search described above, in the intended class and in neighbouring ones.
  • Match the goods or services to the correct class, with a specific description.
  • Keep dated records of the design process and first use of the logo.

Designers should also check that every graphic element is original or properly licensed. Stock icons and templates can bring rights held by others into the mark, and such elements may be hard to protect as part of a brand.

Frequently asked questions on public search of a trademark

What does the IP India public search show?

The IP India public search shows records of trade marks that have been applied for or registered, including the mark, its class, its proprietor and its current status. It reflects what is on the register. It does not by itself say whether a mark can be freely used or registered.

Searchers also type queries such as "ip india public search application status". Status information for a particular application appears in the record once it is located through the search criteria, and the status labels are listed in the status-check guide linked above.

Can an applicant see the Vienna codes given to their logo?

The codes are assigned internally by the Registry after data entry, and the applicant does not select them. Whether they are displayed on a particular record depends on the portal's current display. Searching by Vienna code is the usual way to confirm how similar logos have been coded.

Is a public search the same as a legal clearance?

No. A public search is a self-conducted check of the register, and it cannot catch every conflict, including unregistered marks used in the market. Whether a logo is safe to file or use depends on the facts, and applicants should take independent legal advice on their own position.

This content is published for general information only. It is not legal advice, an advertisement, or a solicitation of work, and reading it does not create an advocate-client relationship. In keeping with the Bar Council of India Rules, Riva Legal Associates does not solicit work or advertise.